Transparent Hook With Nut-10pcs

PRODUCT SPECIFICATION

Material: Stainless steel+PVC+Glue+ABS

Stickers nail size:Length 6cm(2.36″)*Width 6cm(2.36″)

Screw rod Length: 8mm/0.32″

Packing Specifications: 10pcs/Set

Package included: 10 Non-trace sticker nails + 1 accessories bag

Gross Weight: 90g

Do You Also Have Such Worries?

· Nail Damaging the Wall

· Adhesion Not Durable and Residue

· Inferior Quality,Not Durable

You just need such a durable adhesive screw to get rid of trouble.These nails are viscous and firm with super load bearing property.It is quite safe and environmental to use these nails without leaving glue marks on walls.More convenience for your life!

Installation Steps

· Wipe the dirt and grease off the walls with a clean cloth and keep them completely dry.

· Remove the underlying protective film. Do not touch sticking face with your hands.

· Position the patch and stick it horizontally on the wall.

· Press the patch from inside to outside, press the area closely to discharge the air in the patch.

· Install hanging rack and tighten the nuts after 12 hours.

Notices

·Do not use near high temperature.

·Hold heavy things after 12 hours will be better.

· Please clean the adhesive surface with water if it has dust covered before reposition the hook.

·It is not recommended for wallpaper, painted walls and rough surface.(If the wall is not good, it may damage the wall)

·This hook can hold up to 13.2lb/6kg, Normally on the smooth tile surface. But we’d like to suggest no more than 8.8lb/4kg for holding a long time.